FraserPlus Epoxy — Metro Vancouver
Polyaspartic Coatings Vancouver — Same-Day Install, UV-Stable
Polyaspartic technology is the premium upgrade over traditional epoxy. It cures in 60–90 minutes per coat, resists yellowing in direct sun, and tolerates a wider installation temperature range. We use a hybrid epoxy-base / polyaspartic-topcoat system to deliver the best of both chemistries.
What’s Included in Every Install
Polyaspartic Coating — Frequently Asked Questions
How is polyaspartic different from standard epoxy flooring?
Epoxy is a rigid, high-build base coat — excellent bond strength but slow to cure (12–24 hours) and sensitive to UV. Polyaspartic is a flexible aliphatic coating that cures in 60–90 minutes, tolerates temperatures from -30°C to +40°C, and is 100% UV-stable. The best floor systems use epoxy as the base and polyaspartic as the top coat.
Can polyaspartic be installed in cold or damp Vancouver weather?
Yes — this is one of polyaspartic's key advantages over standard epoxy. It cures reliably down to -30°C and tolerates higher relative humidity during application. We install polyaspartic coatings year-round in Metro Vancouver, including during the wet October–March season when standard epoxy would require climate control.
Is polyaspartic worth the extra cost over epoxy for a garage floor?
For residential garages and any surface exposed to sunlight, yes. Polyaspartic top coats resist yellowing for the life of the floor and extend the abrasion lifespan by 30–40% compared to epoxy-only systems. For a garage floor you want to last 15+ years, the extra cost — typically $1–2 per sq ft — is easily justified.
Free Polyaspartic Coating Estimate in Metro Vancouver
We offer free on-site quotes with no obligation. Most projects are quoted within 48 hours. Call or fill in the form below.